Operating instructions

20
HT-SB300
2008 December 5
HT-SB300_A6_EN
Basic Operation
General control (continued)
■ Dolby Virtual Speaker (DVS) sound mode
The Dolby Virtual Speaker (DVS) creates virtual surrounds
comparable to the 5.1ch sound produced by the 2.1ch speaker.
When setting DVS to “ON” for 2 channel stereo signals, Dolby
Pro Logic II brings out virtual sound effects through the signals
converted into 5.1ch.
Press the DVS button.
The Dolby Virtual Speaker indicator lights up.
Notes:
●
Monaural signals do not generate surround effects.
●
DVS sound effect may not be obtained depending on signal
types (the Dolby Virtual Speaker indicator blinks). In this
case, set the DVS mode to “OFF”.
● DVS can only be turned on using remote control.
●
If you turn ON DVS, WOW HD will automatically turn OFF.
●
The DVS can be turned OFF by pressing any of the preset
sound mode buttons.
This product incorporates decoders supporting the Dolby Digital
system and DTS system.
The Dolby Virtual Speaker creates multichannel-like
sound effects.
Compared with the cinema mode, the bass sound
level is slightly reduced.
The Dolby Pro Logic II indicator also lights up if 2ch
sound signals are detected.
DTS (Digital Theater
Systems)
One of the digital audio systems for
theatrical use. As the sound quality
is emphasized, you can enjoy the
realistic sound effect in the home
theater system.
Lights up when detecting DTS
signal.
Dolby Digital
One of the digital audio systems for
theatrical use. You can also enjoy
the stereophonic effect in the home
theater system.
Lights up when detecting Dolby
Digital signal.
ON