Specifications

20
Installing the Motherboard
Installing Add-on Cards
The slots on this motherboard are designed to hold expansion cards and connect them to the
system bus. Expansion slots are a means of adding or enhancing the motherboard’s features
and capabilities. With these efficient facilities, you can increase the motherboard’s capabili-
ties by adding hardware that performs tasks that are not part of the basic system.
1.Before installing an add-on card, check the documentation for the card
carefully. If the card is not Plug and Play, you may have to manually
configure the card before installation.
2.Some PCI-E x16 graphics cards may be so bulky that it could block one
PCI-E x1 slot.
3.Please pull out the PCI-Ex16 graphics card straightway to remove it
when you want to uninstall it.
This motherboard is equipped with three standard PCI slots. PCI stands for
Peripheral Component Interconnect and is a bus standard for expansion
cards, which for the most part, is a supplement of the older ISA bus standard.
The PCI slots on this board are PCI v2.3 compliant.
PCI 1~3
Slots
PCIEX16
Slot
The PCI Express x16 slot is used to install an external PCI Express graphics
card that is fully compliant to the PCI Express Base Specification revision
1.0a.
PCI-E1~2
(PCI-Ex1
Slots)
The two PCI Express x1 slots are fully compliant to the PCI Express Base
Specification revision 1.0a as well.