Owner`s manual

9
1
7
6
5
4
3
2
1
9
2011 April 22
HT-SB600
E-11
Use an outdoor FM aerial if you require better reception.
Consult your dealer.
Note:
When an outdoor FM aerial is used, disconnect the
supplied FM aerial wire.
The illustration below shows the flows of the signals.
Notes:
● This unit supports HDMI which enables ARC (Audio
Return Channel).
● To enable ARC make sure to use High Speed HDMI
cable.
● This structure also needs TV that supports ARC.
● To listen to the sound from non-ARC-compatible TV,
connect the digital output from TV to this system digital
input terminal. (refer page 13)
● This unit can be operated (power on/off, volume up/
down or switch input source) via a TV or similar
component which supports HDMI CEC (Consumer
Electronics Control). If this does not work, it does not
mean this system is faulty. Refer to the operation
manual of the respective component on how to activate
the CEC. Example: Go to the Menu of the component
to search and turn on the CEC. Different brands may
have different naming for the CEC. For Sharp LCD TV,
it is named as AQUOS LINK.
● To watch 3D images, connect 3D-compatible TV and
video component (Blu-ray Disc player, etc.) to this
system.
Make sure to use High Speed HDMI cables and put on
the 3D glasses, otherwise 3D images may not be
viewed properly.
System connections (continued)
Supplied FM aerial:
Connect the FM aerial wire to the FM 75
OHMS socket and position the FM aerial
wire in the direction where the strongest
signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM and
GND (Earth) terminals. Position the AM
loop aerial for optimum reception. Place
the AM loop on a shelf, etc., or attach it to
a stand or a wall with screws (not
supplied).
Installing the AM loop aerial:
Note:
Placing the aerial on the unit or near the AC power lead
may cause noise pickup.
Place the aerial away from the unit for better reception.
Caution:
Turn off all other equipment before making this connection.
Aerial connection
FM
aerial
<Assembling>
<Attaching to the wall>
Screws (not supplied)
Wall
Outdoor FM aerial
75 ohms
coaxial cable
Outdoor
FM aerial
HDMI Connection
DVD/Blu-ray
Game console
Digital tuner
TV
Audio and Video signal
HDMI cables are not supplied
To select HDMI 1, 2, 3 or TV ARC:
On main unit: Press INPUT button repeatedly until
“HDMI1”, “HDMI2”, “HDMI3” or “TV
ARC” appears on the display.
On remote
control:
Press HDMI1, HDMI2, HDMI3 or TV
ARC button.
TV
DVD, Blu-ray
disc player or
similar
To HDMI output
terminal
To HDMI (ARC) input
terminal
To HDMI input
terminal
To HDMI
output
terminal