IG-A10J-W IG-A10J-R IG-A10J-B ENGLISH Plasmacluster is trademarks of SHARP Corporation. Plasmacluster Ion Generator OPERATION MANUAL Read and keep this manual carefully. IG-A10J.Eng.indd 1 09.10.
FEATURES SHARP’s Original Air Disinfecting Technology. Plasmacluster helps to improve the air quality by eliminating of airborne mould*1, viruses*2, allergens*3, and adhering odour*4. 1 Release Plasmacluster Ions. 2 Attack Airborne microbes. 3 Plasmacluster Ions are the same positive and negative ions found in nature. The ions are surrounded by water molecules, and are released into the air.
ENGLISH IMPORTANT SAFETY INSTRUCTIONS................ E-2 • WARNING................................................................ E-2 • CAUTIONS CONCERNING OPERATION....................... E-2 • INSTALLATION GUIDELINES...................................... E-2 PARTS NAME......................................................... E-3 • FRONT. ................................................................................ E-3 • BACK.............................................................................
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should be followed, including the following: WARNING - To reduce the risk of electrical shock, fire, or injury : • Read all instructions before using the unit. • Use only a 220-240 volt outlet. • DO NOT use the unit if the power cord or plug is damaged, or the connection to the wall outlet is loosened. • Periodically remove dust from the plug.
PARTS NAME FRONT Louvres DISPLAY (See E-4) Unit Replacing Light (red) (See E-6) Top Cover Cap ENGLISH Screws High (blue) Air outlet Top Cover Operation Low (blue) Button Fan Speed Indicators Plasmacluster Ion Generating Unit (See E-6,7) Filter (Air Intake) Filter (Air Intake) (See E-5) BACK Use a pointed object, e.g a pen tip, to press this button after replacing Plasmacluster Ion Generating Unit. Do not press it for any other purpose. (This is to reset the Unit Replacing Light.
INSTALLATION POSITION Place the main unit on a smooth, stable surface in a room and insert the plug into an outlet. DO NOT carry the unit by holding the louvres. DO NOT USE the below items near the unit. silicone-containing products* SPRAY Installation Guidance. WAX PESTICIDES Leave at least 15cm of clearance behind the Unit. 20cm on both sides, and 1m abore the unit. ABOVE More than 1m * Hair care products, cosmetic products, water proof sprays, polish glass cleaner, and spray on wax.
CLEANING AND MAINTENANCE WARNING: When cleaning the unit, be sure to first unplug the power cord, and never handle the plug with wet hands. Electrical shock and/or bodily injury may occur as a result. Main Unit ENGLISH Every month or more often if necessary Wipe with a dry soft cloth. rt> Use water and a mild detergent. Then wipe with a well wrung-out cloth. Make sure to dry out the main unit before use.
PLASMACLUSTER ION GENERATING UNIT REPLACEMENT In order to release Plasmacluster Ions stably, it is necessary to periodically replace the Ion Generating Unit. The Unit Replacing Light will be ON as a reminder for replacement. Display Elapsed Time Beginning to use Message lighting (blue) approx. 17,500 hours (approx. 2 years if used 24/7) flashing(red) lighting (blue) Suggest replacing approx.19,000 hours (approx.
HOW TO REPLACE THE PLASMACLUSTER ION GENERATING UNIT *When replacing the Plasmacluster Ion Generating Unit, be sure to turn off the main unit, unplug the power cord, and never handle the plug with wet hands. ng 1 Remove the LOUVRES. 2 Remove the TOP COVER CAP. 3 Turn the 2 SCREWS ENGLISH NT SCREWS 4 5 Lift up the TOP COVER. Replace the Plasmacluster Ion Generating Unit. *See the manual of Plasmacluster Ion Generating Unit for replacement. E-7 IG-A10J.Eng.indd 9 09.10.
SPECIFICATIONS Model IG-A10J Power supply 220-240V 50Hz (Low) 14.0 6.5 Power consumption (W) (High) Operating noise level (dBA) (High) 44 (Low) 34 Airflow volume(m3/hour) (High) 102 (Low) 72 Applicable floor surface area (m2)* 10 Power cord (m) 1.8 Outer dimensions (mm) 140 Weight (kg) 160 345 (W 2.5 D H) *The target floor surface area for which an emitted airborne ion density of about 25,000 ions/cm3 can be measured at a point near the center of the room (at a height of about 1.
ENGLISH If you still require service, contact your SHARP Approved Service Centre. SHARP Approved Service Centre locations can be found in the support area of our website: Australia : http://www.sharp.net.au New Zealand : http://www.sharp.net.nz E-9 IG-A10J.Eng.indd 11 09.10.
SHARP CORPORATION OF AUSTRALIA PTY.LTD. A. B. N. 40 003 039 405 1 HUNTINGWOOD DRIVE, HUNTINGWOOD, N.S.W. 2148 P.O.BOX 6827, BLACKTOWN. N.S.W. 2148 www.sharp.net.au SHARP CORPORATION OF NEW ZEALAND LIMITED 59 HUGO JOHNSTON DRIVE, PENROSE, AUCKLAND www.sharp.net.nz Printed in China TINS-A359KKRZ 09K- CN 1 IG-A10J.Eng.indd 12 09.10.
