Specifications

E-6
OPERATION
* This operation manual is based on IG-A40E.
The operation is same as IG-A20E.
Open the cover of Control Panel.
In case that the cover is fixed by a screw, take out the
rubber cover and a screw, and open the cover of control
panel.
Fix the cover of Control Panel.
As necessary, screw down the cover with the provided
screw and the washer and fi t in the rubber cover.
(Please see Page E-3)
Control
panel
Press the Operation Button to select the preferred mode.
LOW
Release high-density
Plasmacluster ions quietly.
MED
Release high-density
Plasmacluster ions at medium fan
speed.
HIGH
Increase the volume of high-
density Plasmacluster ions to
increase the purifi ying capacity.
Power 'OFF'
OPERATION BUTTON
AUTO RESTART
If the AUTO RESTART switch is set to "ON"
and the unit is accidently unplugged, the
circuit breaker trips of there is a power failure,
the unit will automatically start operation at the
previous setting power is restored.
AUTO RESTART
Switch
IG-A20EA40E.en.indd8IG-A20EA40E.en.indd8 2009/09/1713:39:072009/09/1713:39:07