Owner`s manual

55
• Depressing the M button for 2 seconds, or if no button is
pressed for a period of 2 minutes, operation will revert to
the NORM (or GAUG) Surface Main screen.
NOTE: When the Conservative Factor is set ON,
the No Deco Limit times are reduced to values
equivalent to those that would be available at
the next higher 3000 foot (915 meter) Altitude.
Set Backlight Duration information includes (Fig. 49):
> Graphics BL and dur (meaning Backlight Duration).
> Set Point (seconds value), flashing, with clock icon and
graphic SEC.
• Pressing and releasing the S button momentarily and
repeatedly (< 2 sec each time) will step upward through the
Set Points of 0, 5, and 10 (seconds).
• Pressing and releasing the A button momentarily (< 2 sec)
will save the setting and access Set Sampling Rate.
• Depressing the A and S buttons simultaneously for 2
seconds will save the setting and revert to the Set U screen.
• Depressing the M button for 2 seconds, or if no button is
pressed for a period of 2 minutes, operation will revert to
the NORM (or GAUG) Surface Main screen.
Fig. 49 - SET BACKLIGHT
DURATION