Owner`s manual

62
NORM/GAUG LOG MODE
Log Mode displays information from the latest 24 NORM and/or GAUG dives sequen-
tially in reverse order (the most recent first). Log information is retained until over written
by another dive. Battery removal will not affect the Log data stored for viewing.
After exceeding 24 dives, data from the most recent dive completed will be recorded in
the Log and the oldest dive's data deleted.
Dives will be numbered 1 to 24 starting at #1 each time a new series of dives begins.
After it shuts Off 24 hours after a dive, the first dive of the next new series will be #1.
• Log Mode can be accessed by pressing and releasing the A button momentarily (< 2
sec) while viewing the Watch Default Time, NORM Surface Main, or GAUG Surface
Main screen.
> The most recent dive’s Log Preview screen will be displayed.
• Depressing the S button will then scroll back through the previous dives' Preview
screens at a rate of 8 per second until released.
• Pressing and releasing the S button momentarily (< 2 sec) while viewing a Preview
screen will display that dive’s Log Data 1 screen.
• If that was a NORM Nitrox dive, pressing and releasing the S button (< 2 sec) again
will display that dive’s Log Data 2 screen (O2 data).
> Log screens remain on display until further button action occurs.
• Depressing the M button for 2 seconds, or if no button is pressed during a 2 minute
period, operation will revert to the NORM (or GAUG) Surface Main screen.
• Pressing the L button will activate the Backlight.