User`s manual

5-5
Degree of Match Inspection
5
REFIMG ARE (MDL0)
Move the cursor to " REFIMG ARE(MDL0)" and press the SET key. When the SET item is
highlighted, press the SET key again to bring up the setting screen.
When a rectangle is selected
Specify the upper left and lower right
corners of the reference image area.
When a horizontal line is selected
Specify the start and end points on the X
axis. Specify the start and end points using
the up/down/left/right arrow keys. The
points will move along the X axis (while
keeping the same Y coordinate).
RECTANGLE RESET RETURN
MDL
0
1
UP.L (224.208)
2 LO.R (287.271)
3 MOVE
4 REFERENCE IMG
SET=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
F C1 BRT
X:224 Y:139
Setting screen (RECTANGLE)
Reference image of MDL0
Detection image of MDL0
Search area of MDL0
Reference image of MDL1
Detection image of MDL1
Search area of MDL1
SERIAL NO.
8F053G26
MODEL
IV
-
S30MX
SET=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
F C1 BRTX-LINE RESET RETURN
MDL
0
1
S.PT (199.245)
2 E.PT (328.245)
3 MOVE
4 REFERENCE IMG
X:194 Y:245
Setting screen (X-LINE)
Crosshair cursor
(detection coordinate)
Solid line (reference line)
Dotted line (search line)
SERIAL NO.
8F053G26
MODEL
IV
-
S30MX