User`s manual

5-8
Degree of Match Inspection
5
1
DTECT PRECISION STANDARD
2
REGISTER NO. 00(0~15)
3
MODE 2P-SCH
4 SEARCH YES
5 MATCHING AVG-GRAYS
REGISTER NO.
6
MDL 0
7
MDL 1
F C1 BRT
MEAS CND SCREEN COND SAVE
IMG PRE-PROC
REG-COND
EVALUATION
DST&ANGL
NUM-CALC
OUT
SET=REG COND FOR ESC=BACK SEL=CHNG IMG TRG=FUNC
15141312111009080706050403020100
× S× × × × × × × × × × × × × ×
× × × × × × × × × × × × × × × ×
1 REGISTER NO.
2 CONDITION SET
3 MATCH LVL(MDL0)
4 XCOORD.(MDL0)
5 Y COORD.(MDL0)
6 GRAY LVL(MDL0)
7 MATCH LVL(MDL1)
8 X COORD.(MDL1)
9 Y COORD.(MDL1)
0 GRAY LVL(MDL1)
q TEST
F C1 DRKSELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE01
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0
POSI-CORRECT
MEAS01(CHK-DEG-MATCH)
IMG PRE-PROC
MEAS CND
REG-COND
EVALUATION COND
DISTANCE&ANGLE COND
NUM-CALC
OUT-COND
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
+
+
+
1 REGISTER NO. 00(0~15) [TEST RESULT] [OUTPUT]
2 CONDITION SET‘ AUTO(–10%)
3 MATCH LVL(MDL0) -10000~+10000 M0= NO
4 X COORD.(MDL0) 000.0~511.0 X0= NO
5 Y COORD.(MDL0) 000.0~479.0 Y0= NO
6 GRAY LVL(MDL0) 000.0~255.0 G0= NO
7 MATCH LVL(MDL1) -10000~+10000 M1= NO
8 X COORD.(MDL1) 000.0~511.0 X1= NO
9 Y COORD.(MDL1) 000.0~479.0 Y1= NO
0 GRAY LVL(MDL1) 000.0~255.0 G1= NO
q TEST EXEC(WITH-POSI.ADJ WITHOUT-POSI.ADJ)
SET=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
F C1 BRTEVALUAT COND SCREEN COND SAVE EDIT SEL
Set the evaluation conditions
How to move to the evaluation condition setting screen
There are two methods for getting to the evaluation condition setting screen.
1) Select "COND" in the upper function menu on
the "MEAS COND" (or "REG COND") screen
and press the SET key. Select
"EVALUATION" on the popup menu to go to
the "EVALUAT COND" screen.
2) Move the cursor to the "EVALUATION COND"
item on the menu tree screen and press the
SET key.
The "EVALUAT COND" (evaluation conditions)
will appear.
For details about "EVALUAT COND," see page
3-18.