User`s manual

Lead Inspection
6-7
6
1
REGISTER NO. 00(0∼15)
2
REGISTER EXIST YES
3
DTECT PRECISION STANDARD
REGISTER NO.
4 MEAS OBJECT
LEAD LENGTH
15141312111009080706050403020100
×
○
× × × × × × × × × × × × × ×
× × × × × × × × × × × × × × × ×
F C1 BRTMEAS CND SCREEN COND SAVE
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
IMG PRE-PROC
REG-COND
EVALUATION
NUM-CALC
OUT
1 REGISTER NO. 00(0~15) [TEST RESULT] [OUTPUT]
2 CONDITION SET AUTO(
±
10%)
3 NUMBER OF OBJ 000~128 K= NO
4 DISTANCE 000.0~702.0 D= NO
5 LEAD WIDTH 000.0~702.0 W= NO
6 LEAD LENGTH 000.0~702.0 L= NO
7 TEST EXEC(WITH-POSI.ADJ WITHOUT-POSI.ADJ)
F C1 BRTEVALUAT COND SCREEN COND SAVE EDIT SEL
SET=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
Set the evaluation conditions
How to move to the evaluation condition setting screen
There are two methods for getting to the evaluation condition setting screen.
1) Select "COND" in the upper function menu
on the "MEAS CND" (or "REG COND")
screen and press the SET key. Select
"EVALUATION" on the pop up menu to go
to the "EVALUAT COND" screen.
2) Move the cursor to the "EVALUATION
COND" item on the menu tree screen and
press the SET key.
The "EVALUAT COND"(evaluation conditions)
screen will appear.
For details about the evaluation conditions,
see page 3-18.
1 REGISTER NO.
2 CONDITION SET
3 NUMBER OF OBJ
4 DISTANCE
5 LEAD WIDTH
6 LEAD LENGTH
7 TEST
F C1 BRTSELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND (CAMERA1)
MEAS0
POSI-CORRECT
MEAS01 (INSRECT-LEAD)
IMG PRE-PROC
MEAS CND
EVALUATION COND
NUM-CALC
OUT-COND
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
TYPE(NEW)
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
+
+
+
+