User`s manual

8-5
8
Area Measurement by Binary Conversion
MEAS SHAPE
Specify shape of measuring range.
MEAS AREA
Specify a search area.
When "RECTANGLE" is selected
Specify the upper left and lower right corners of the
rectangular search area.
When "CIRCLE" is selected
Specify the center and the radius.
When "ELLIPSE" is selected
Specify the center and the radius.
THRESHOLD
Specify a threshold value.
Move the cursor to " U.LM" and press the SET key. Then move the cursor to " L.LM" and
press the SET key again. The current value will be highlighted for each item. You can increase
or decrease the value by pressing the up and down arrow keys. Press the ESC key to confirm
the value you want.
The values above can be reset to an appropriate level automatically. Move the cursor to the
upper function menu by pressing the TRG/BRT key and select "AUTO-REG". Then press the
SET key to set the levels automatically.
For details, see page 3-11.
INVERT B/W
Select whether to invert the display of black and white inside the measurement area.
ELGNATCER
.srenrocthgirrewoldnatfelreppuehtrofsetanidroocehtyficepS
.elgnatcersihtybdesolcneaeraehteblliwaeratnemerusaemehT
ELCRIC
ehteblliwaeratnemerusaemehT.suidarehtdnaretnecehtyficepS
.elcricsihtybdesolcneaera
ESPILLE
ehteblliwaeratnemerusaemehT.suidarehtdnaretnecehtyficepS
.espillesihtybdesolcneaera
UP.L
LO.R
Center
Radius
Radius
Center