User`s manual

8-8
8
Area Measurement by Binary Conversion
Set the evaluation conditions
The display details vary with the setting of each window.
Numeric calculation setting
- Press the TRG/BRT key to move the cursor to the upper function menu, and highlight "COND" using the
left and right arrow keys. Press the SET key to show the popup menu. Select "NUM-CALC" from the
popup menu.
- Select "NUM-CALC" on the menu tree.
See "Chapter 15: Numeric calculation."
Output condition setting
- Press the TRG/BRT key to move the cursor to the upper function menu, and highlight "COND" using the
left and right arrow keys. Press the SET key to display the popup menu. Select "OUT" from the popup
menu.
- Select "OUT-COND" on the menu tree.
See "Chapter 17: Set the Input/Output Conditions."
EVALUAT COND SCREEN COND SAVE EDIT SEL F C1 BRT
1 CHNG REG [TEST RESULT] [OUTPUT]
2 CONDITION SET RESET AUTO(+10%)
3 REGISTER00 000000~245760 A00=000200 OK NO
4 REGISTER01 000000~245760 A01=000201 OK NO
5 REGISTER02 000000~245760 A02=000202 OK NO
6 REGISTER03 000000~245760 A03=000203 OK NO
7 REGISTER04 000000~245760 A04=000204 OK NO
8 REGISTER05 000000~245760 A05=000205 OK NO
9 REGISTER06 000000~245760 A06=000206 OK NO
0 REGISTER07 000000~245760 A07=000207 OK NO
q TEST EXEC(WITH-POSI.ADJ WITHOUT-POSI.ADJ)
Change the display of items 3 to
0 from REGISTER00 to 07" to
REGISTER08 to 15."
You can set the output destinations
using the up and down keys.
(NO, Y0 to Y7, C000 to C127)
EVALUAT COND SCREEN COND SAVE EDIT SEL F C1 BRT
1 CHNG REG [TEST RESULT] [OUTPUT]
2 CONDITION SET RESET AUTO(+10%)
3 REGISTER00 000000~245760 A00=000200 OK NO
4 REGISTER01 000000~245760 A01=000201 OK NO
5 REGISTER02 000000~245760 A02=000202 OK NO
6 REGISTER03 000000~245760 A03=000203 OK NO
7 TEST EXEC(WITH-POSI.ADJ WITHOUT-POSI.ADJ)
You can set the output destinations
using the up and down keys.
(NO, Y0 to Y7, C000 to C127)
EVALUAT COND SCREEN COND SAVE EDIT SEL F C1 BRT
1 CHNG REG [TEST RESULT] [OUTPUT]
2 CONDITION SET RESET AUTO(+10%)
3 REGISTER00 000000~245760 A00=000200 OK NO
4 TEST EXEC(WITH-POSI.ADJ WITHOUT-POSI.ADJ)
You can set the output destinations
using the up and down keys.
(NO, Y0 to Y7, C000 to C127)
• When WINDOW has been set to "NUM-OF-MASK 4"
• When WINDOW has been set to "BINARY-IMG-MASK or "POLYGON"
• When WINDOW has been set to "NUM-OF-
MASK 1" and "NUM-OF-MASK 2"