User`s manual

10-5
Object Identification by Binary Conversion
10
How to set the register conditions
How to enter the REG-COND setting screen
There are three methods for getting to the REG-COND setting screen.
1) On the "MEA-CND" setting screen, move the
cursor to the " BIN AREA COND" and
press the SET key. The cursor will move into
the table. Move the cursor to the "○" column
and press the SET key.
Note: If you press the SET key in the "X"
column, the setting will be invalid.
2) On the "MEA-CND" setting screen, press the
TRG/BRT key to move the cursor to the upper
function menu. Select the "COND" item and
then select the "REG COND" item and press
the SET key.
3) On the menu tree, move the cursor to the
"MEAS CND" item, and press the right arrow
key. The sub menu which contains the "REG
COND" item will appear. Move the cursor to
this item and press the SET key.
REGISTER NO.
The currently selected register number is
displayed.
If you want to set the measurement conditions
for a different register number, press the SET
key to highlight the register number currently
selected. Then press the up and down arrow
keys to select the register number whose
measurement conditions you want to set.
Press the SET key to confirm your selection.
Note: When the "BINARY-IMG-MASK" or the
"POLYGON" is selected at
" WINDOW" on the "MEA-CND" screen, the " REGISTER NO." line will not be
displayed and the other item numbers are decremented by one since the register number
for "BINARY-IMG-MASK" and "POLYGON" is fixed.
1 REGISTER NO.
2 MEAS SHAPE
3 MEAS AREA
4 THRESHOLD
5 INVERT B/W
F C1 BRTSELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE01
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0
POSI-DEVIATION
MEAS01(LABEL-BIN-OBJ)
IMG PRE-PROC
MEAS CND
REG-COND
EVALUATION COND
NUM-CALC
OUT-COND
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
+
+
1 MEAS SHAPE
2 MEAS AREA
3 THRESHOLD
4 INVERT B/W
MEA-CND
1 REGISTER NO.
00(0∼15)
2
MEAS SHAPE RECTANGLE
3
MEAS AREA SET
(224,208)∼(287,271)
4 THRESHOLD SET [U.LM255 L.LM100 (0~255)]
5
INVERT B/W NO
F C1 BRTREG COND SCREEN COND SAVE DETAIL
NO
YES
RECTANGLE
CIRCLE
ELLIPSE
IMG PRE-PROC
REG COND
EVALUATION
DST&ANGL
NUM-CALC
OUT
MEA-CND SCREEN COND SAVE
15141312111009080706050403020100
× × ×
○
F C1 BRT
1 MEAS GRAV CENTER NO
2
WINDOW NORMAL
3
REGISTER NO.
0(0∼3)
4
REGISTER EXIST YES
5
LABEL ORDER SCAN-ORDER
6 AX.ANGL NO
7
FILT NO
8
CIRC-L NO
9
MID-PNT NO
REGISTER NO.
0
BIN AREA COND