User`s manual

1-10
Setting and Operating Outline
1
1-3 Description of the Operation screen
When the IV-S30 is started, the operation screen shown below will appear.
Each area of the operation screen is described below.
Displays the number of the currently selected object. (Object numbers can range from 00 to 15 for
the IV-S31MX and from 0 to 31 for the IV-S32MX/S32MX.)
Select whether to display captured images on the screen as freeze images or through images.
To switch the image between "Through" and "Freeze" modes, press the SEL key on the remote
keypad, and then press the up and down arrow keys.
Indicates which camera is currently selected
C1: Camera 1 (the camera connected to the "CAMERA1" connector)
C2: Camera 2 (the camera connected to the "CAMERA2" connector)
The brightness of the captured image can be set to one of two levels.
How to select the brightness level
On any screen, except the operation screen, move the cursor to the "F" (freeze) or "T" (through)
position on the upper part of the screen by pressing the SEL key. Then, press the left or right arrow key
to move the cursor to the "BRT" (bright) or "DRK" (dark) indicator. Press the up or down arrow key to
switch between bright and dark.
1
Object type number
9
READY output
6
Measuring time
8
I/O relay
2
Freeze/through screen
3
Camera currently selected
4
Image brightness: bright/dark
5
Software version
0
Menu display
（TYPE00）
F C1 BRT
V*.**
MEAS 0000ms 2001-10-14 10:38
X0~7
□□□□□□□□ Y0~7 □□□□□□□□ READY ■
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHGN-REG SCREEN-CHG CHGTYPE
MEASURE 0 CAM1 NO
7
Measurement
setting details
yalpsiD
dohtem
noitpircseD
hguorhT
egami
.aremacehtybderutpacsegamifomaertsehtsyalpsiD-
.seitreporpegamidnasucofaremacehtgnitsujdarofdesU-
ezeerF
egami
.stnemerusaemgnikamfotratsehttaderutpacegamielgnisehtsyalpsiD-
.snoitidnocgnitarepodnasnoitidnoctnemerusaemehtfohcaetesotdesU-
neercS
yalpsid
noitpircseD
thgirB.ssenthgirbstignignahctuohtiwegamiderutpacehtyalpsiD
kraDssenthgirblautcaeht2/1taegamiderutpacehtyalpsiD