User`s manual
11-8
Existence Inspection by Point Measurement
11
The "EVALUAT COND"(evaluation conditions) screen will appear.
For details about the evaluation conditions, see page 3-18.
Numeric calculation setting
- Press the TRG/BRT key to move the cursor to the upper function menu, and highlight "COND" using
the left and right arrow keys. Press the SET key to show the popup menu. Select "NUM-CALC" from
the popup menu.
- Select "NUM-CALC" on the menu tree.
See "Chapter 15: Numeric calculation."
Output condition setting
- Press the TRG/BRT key to move the cursor to the upper function menu, and highlight "COND" using
the left and right arrow keys. Press the SET key to display the popup menu. Select "OUT" from the
popup menu.
- Select "OUT-COND" on the menu tree.
See "Chapter 17: Set the Input/Output Conditions."
・When MODE has been set to "BINARY"
・When MODE has been set to AVG-GRAYS
1
PAGE CHNG ˚ [TEST RESULT] [OUTPUT]
2
P000 WHITE OK NO
3
P001 WHITE OK NO
4
P002 WHITE OK NO
5
P003 WHITE OK NO
6
P004 WHITE OK NO
7
P005
8
P006
9
P007
0
TEST EXEC (WITH-POSI.ADJ WITHOUT-POSI.ADJ)
EVALUAT COND SCREEN COND SAVE EDIT SEL F C1 DRK
①
PAGE CHNG [TEST RESULT] [OUTPUT]
②
CONDITION SET REST(+10%)
③
P000 200~210 200 OK NO
④
P001 200~210 200 OK NO
⑤
P002 200~210 200 OK NO
⑥
P003 200~210 200 OK NO
⑦
P004 200~210 200 OK NO
⑧
P005
⑨
P006
⑩
P007
⑪
TEST EXEC(WITH-POSI.ADJ WITHOUT-POSI.ADJ)
EVALUAT COND SCREEN COND SAVE EDIT SEL F C1 DRK
Not displayed for unregistered point numbers.
You can set the output destinations using the up
and down keys. (NO, Y0 to Y7, C000 to C127)
Acceptance (OK/NG) criteria
WHITE: Acceptable when a majority of the inspected
pixels are white.
BLACK: Acceptable when a majority of the inspected
pixels are black.
Ex.: When the point to be inspected is 8 X 8 (64 pixels)
and WHITE is specified, if 33 white pixels are
detected, the point is accepted.
You can set the output destinations using the up
and down keys. (NO, Y0 to Y7, C000 to C127)
Average light level for each point
Average light level for each point