User`s manual

12-5
12
Multiple Positional Measurement
[1] Set the register conditions for a gray search
Set a reference image
Move the cursor to " REF-IMG AREA" and
press the SET key. When the SET item is
highlighted, press the SET key again to bring up
the setting screen.
Set the coordinates for " UP.L" and " LO.R."
The rectangle inside the solid lines is the
reference image.
Register a reference image
After setting the reference image area, store an
image in the controller as a reference image.
Select " REFERENCE IMG" using the up/
down arrow keys and select "REG" from the
popup menu.
1
REGISTER NO. 0(0∼3)
2
REF-IMG AREA SET (224.208)∼(287.271)
3 SEARCH AREA SET (216.200)∼(295.279)
4 MATCH LVL(CONTR) +05000
5 MATCH LVL +07000
REG COND
SCREEN COND SAVE DETAIL F C1 DRK
SEL=WINDOW SET ESC=BACK SEL=CHNG IMG TRG=FUNC
Search area
Object to measure
Search direct
1 UP.L (224.208)
2 LO.R (287.271)
3 MOVE
4 REFERENCE IMG
RECTANGLE RESET RETURN F C1 BRT
SET=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
X:224 Y:208
X:224 Y:208
RECTANGLE RESET RETURN F C1 BRT
MDL
0
1
UP.L (224.208)
2 LO.R (287.271)
3 MOVE
4 REFERENCE IMG
SET=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
CONTRAST SRCH
REG
DISP