User`s manual

12-6
Multiple Positional Measurement
12
Select a reference image
Move the cursor to the function menu on the
"REG COND" screen by pressing the TRG/BRT
key. Move the cursor to "DETAIL." Press the
SET key on the "REFERENCE IMG" line in the
popup menu. The white square on the left will
change to a black square. Then, the
" REFERENCE IMG" item will appear on the
screen.
You can use the same procedures to show
"DETECT CRD" (detection coordinates) and
"CONTR.PIXL" (contraction pixels) on the
screen.
On the " REFERENCE IMG" line, select a
reference image from the reference images
already registered.
Ex : 015 (000 to 026)
Select reference image No. 15 from the
26 registered reference images (000 to
026).
SEARCH ARE
Specify the search area (inside the dotted lines) on the " SEARCH AREA (MDL0)" line, using the
same procedures used for setting the reference image area.
DTECT COORD (detection coordinates)
Select whether to use the detection coordinates
as the center of the reference area or to allow
the point to be set freely.
CONTR.PIXEL (contraction pixels)
1: Search the image in units of 2 pixels.
2: Search the image in units of 4 pixels.
3: Search the image in units of 8 pixels.
SEL=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
F C1 BRT
REG COND SCREEN COND SAVE DETAIL
1 REGISTER NO. 0(0∼3)
2 REFERENCE IMG 015(000~026)
3 REF-IMG AREA SET (224.208)∼(287.271)
4 SEARCH AREA SET (216.200)∼(295.279)
5 DIRECT COORD CENTER (234.219)
6 CONTR.PIXEL 3
7 MATCH LVL(CONTR) +05000
8 MATCH LVL +07000
※ Make □ to ■ on the
popup menu, the
respective item will be
added to the "REG
COND" menu.
※
■
REFERENCE IMG
■
DETECT CRD
■
CONTR.PIXL
SEL=WINDOW SET ESC=BACK SEL=CHNG IMG TRG=FUNC
F C1 BRT
REG COND SCREEN COND SAVE DETAIL
1 REGISTER NO. 0(0∼3)
2 REFERENCE IMG 015(000~026)
3 REF-IMG AREA SET (224.208)∼(287.271)
4 SEARCH AREA SET (216.200)∼(295.279)
5 DTECT COORD CENTER (234.219)
6 CONTR.PIXEL 3
7 MATCH LVL(CONTR) +05000
8 MATCH LVL +07000
CENTER
SET
■An example
Object to measure
Seach area