User`s manual
12-8
Multiple Positional Measurement
12
SEARCH AREA
Select " SEARCH AREA" and press the SET key to go to the setting screen.
When "RECTANGLE" is selected
Highlight " UP.L" and press the SET key.
The X and Y axes will appear in the seach
area. Move the X/Y axes using the up/down/
left/right arrow keys to identify the upper left
corner. When correct, press the SET key.
- To return to the previous coordinates, press
the ESC key.
Next, highlight " LO.R" and press the SET
key. Identify the lower right corner the same
way.
DTECT MODE
Select an image processing method for the
edges.
CHNG POINT
DRK → BRT
BRT → DRK See page 3-15.
CENT (BRT)
CENT (DRK)
SEARCH DIRECT
Specify a search direction. The direction for searching varies with each detection shape.
When "RECTANGLE" is selected
When "LINE" is selected
When "CIRC-L" or "ELIP-L" is selected
For details, see page 3-15.
RECTANGLE RESET RETURN
1
UP.L (224.208)
2
LO.R (287.271)
3
MOVE
SET=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
X:224 Y:208
F C1 BRT
latnoziroH )→( thgirottfelmorfenilecnereferehtnacS )→(
latnoziroH )←( thgirottfelmorfenilecnereferehtnacS )←(
lacitreV )↓( mottobotpotmorfenilecnereferehtnacS )↓(
lacitreV )↑( pototmottobmorfenilecnereferehtnacS )↑(
tnioptratS → tniopdnE tniopdneehtottniopgnitratsehtmorfenilthgiartsagnolanacS
tniopdnE → tnioptratS tniopgnitratsehtottniopdneehtmorfenilthgiartsagnolanacS
noitceridesiwkcolCesiwkcolcecnerefmucricehtdnuoranacS
noitceridesiwkcolc-retnuoC esiwkcolc-retnuocecnerefmucricehtdnuoranacS