User`s manual

12-11
12
Multiple Positional Measurement
Display the measurement results
Return to the operation screen and press the TRG/BRT key. The measurement results will be dis-
played on the screen.
REGISTER NO
K=006 OK
DTECT NO.000（000∼005）
X=102.0
Y=257.0
Register number
Number of points detected
*3
*3 Coordinates of the detected point.
● An example of the display when "gray search" is selected.
Detected point coordinate.
Numbered in the order detected
(range)
* 1 The detection order can be set to either "SCAN-ORDER " or "MATCH LVL" on item "4DETECT
ORDER" on the "MEAS CND" screen. - See page 12-3.
* 2 The inspection number corresponds to the image of the solid line.
*2
F C1 BRT
V*.**
(TYPE00)
OK
MEAS XXXXms 2001-10-14 10:38
MEASUREMENT 1 MULTI-POSI
REGISTER NO.0(0~3)
K=004 OK
DETECT NO.000(000∼003)
M=+09870 OK
X=236.0
Y=163.0
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
X0∼7 □□□□□□□□ Y0∼7 □□□□□□□□ READY □
Final evaluation result
Measuring time
Measuring program number
Register number
Number of detected images
Numbered in the order detected (range)
*1
Degree of match
Detected point coordinates
- Move the cursor to CHG-REG (change register)"
and press the up key. The measurement result
display will change in the following order: Register
No. 0 (detection No. 000 fi 001fi (ooo) fi (ooo) fi
Register No. 3 (ooo) fi Register No. 0 (ooo) fi
(ooo), and so will the measurement screen. Press
the down key to change the display, moving through
the items in reverse order.
● An example of the display when "gray search" is selected.