User`s manual

13-5
13
Multiple Degree of Match Inspection
Set the coordinates for " UP.L" and "
LO.R." The rectangle inside the solid lines is
the reference image.
Register a reference image
After setting the reference image area, store
an image in the controller as a reference
image.
Select " REFERENCE IMG" using the up/
down arrow keys and select "REG" from the
popup menu.
Select a reference image
Move the cursor to the function menu on the
"REG COND" screen by pressing the TRG/
BRT key. Move the cursor to "DETAIL."
Press the SET key on the "REFERENCE
IMG" line in the popup menu. The white
square on the left will change to a black
square. Then, the " REFERENCE IMG"
item will appear on the screen.
On the " REFERENCE IMG" line, select
a reference image from the reference
images already registered.
Ex : 015 (000 to 026)
Select reference image No. 15 from
the 26 registered reference images
(000 to 026).
RECTANGLE RESET RETURN F C1 BRT
MDL
0
1
UP.L (224.208)
2 LO.R (287.271)
3 MOVE
4 REFERENCE IMG
X:224 Y:208
SET=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
X:224 Y:208
RECTANGLE RESET RETURN F C1 BRT
MDL
0
1
UP.L (224.208)
2 LO.R (287.271)
3 MOVE
4 REFERENCE IMG
SET=DECISION ESC=BACK SEL=CHNG IMG TRG=FUNC
CONTRAST SRCH
REG
DISP
F C1 BRT
SEL=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
※ Make □ to ■ on the popup menu,
the respective item will be added to
the "REG COND" menu.
REG COND SCREEN COND SAVE DETAIL
REGISTER NO. 0(0∼3)
2 REFERENCE IMG 001(000~001)
3 REF-IMG AREA SET (191.210)∼(255.273)
4 SEARCH AREA SET (216.200)∼(295.279)
5 DTECT COORD CENTER (223.241)
6 CONTR.PIXL (MDL0) 3
7 MATCH LVL(CONTR) +05000
8 MATCH LVL +07000
■
REFERENCE IMG ※
■
DETECT CRD
■
CONTR.PIXL