User`s manual

13-7
13
Multiple Degree of Match Inspection
Set the evaluation conditions
How to move to the evaluation condition setting screen
There are two methods for getting to the evaluation condition setting screen.
1) Select "COND" in the upper function menu on
the "MEAS COND (or REG COND)" screen
and press the SET key. Select
"EVALUATION" on the pop up menu to go to
the "EVALUAT COND" screen.
2) Move the cursor to the "EVALUATION COND"
item on the menu tree screen and press the
SET key.
The "EVALUAT COND"(evaluation conditions)
screen will appear.
For details about the evaluation conditions,
see page 3-18.
MEAS CND SCREEN COND SAVE
1
DTECT PRECISION STANDARD
2
REGISTER NO. 0(0~3)
3
MODE YES
4 MATCHING AVG-GRAYS
5 DETECT ORDER SCAN-ORDER
REGISTER NO.
6
DTECT OBJECT
15141312111009080706050403020100
× S× ×
F C1 BRT
SET=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
IMG PRE-PROC
REG-COND
EVALUATION
DST&ANGL
NUM-CALC
OUT
1 REGISTER NO. 0COND.1 [TEST RESULT] [OUTPUT]
2 CONDITION SET AUTO(–10%)
3 NUMBER OF OBJ 000~128 K= NO
4 DTECT NUMBER 000~(0~000)
5 MATCH LVL -10000~+1000 M0= NO
6 GRAY LVL 000.0~255.0 G0= NO
X COORD. X0=
Y COORD. Y0=
7 TEST EXEC(WITH-POSI.ADJ WITHOUT-POSI.ADJ)
SET=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
F C1 BRTEVALUAT COND SCREEN COND SAVE EDIT SEL
F C1 BRTSELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0
POSI-CORRECT
MEAS01(MULTI MATCHES)
IMG PRE-PROC
MEAS CND
REG-COND
EVALUATION COND
DISTANCE&ANGLE COND
NUM-CALC
OUT-COND
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
+
+
+
1 REGISTER NO.
2 CONDITION SET
3 NUMBER OF OBJ
4 DTECT NUMBER
5 MATCH LVL
6 GRAY LVL
7 TEST