User`s manual

1-14

Setting and Operating Outline

1-5 Common operations for each menu

[1] Operations to return to the operation screen

You can return to the operation screen, MAIN MENU, or setting screen from any menu by a single

operation.

Menu display

[TYPE RUN COND] menu

[2] Saving data

All of the data such as measurement and evaluation conditions entered on the "TYPE RUN COND,"

"MEA-CND," and "SYSTEM COND" menus, can be saved into the IV-S30 flash memory.

Operation procedure

[SYS-CND] menu

1. On each menu screen, move the cursor to "SAVE" using the up/down and left/right keys, and press

the SET key.

- The following message will be displayed on the lower part of the screen.

DATA SAVE? (Do you want to save the data?) (YES=[SET]/NO=[ESC])

2. Press the SET key.

- The IV-S30 will start saving the data and the progress will be displayed on the bottom of the screen.

When the data has been saved in the IV-S30 flash memory, the display will change from "SAVING" to

"COMPLETE SAVE."

REFERENCE IMG

SYSTEM I/O

OBJECT TYPE COND

■■

■

■■■■■■■■■■■□□□□□

SAVING

F C1 BRT

OPS-MENU

MAIN

SELECT

RETURN

SCREEN SAVE

Return to the operation screen

Return to the MAIN screen.

Return to the currently selected setting screen.

Return to the previously selected screen.

F C1 BRT

SCREEN SAVE

DATA SAVE?(YES=[SET],NO=[ESC])