User`s manual
1-15
Setting and Operating Outline
1
[2] Change the Japanese or English display mode
Change disply between Japanese and English. Use the [POWER ON SETTING] menu for the selection.
Display procedure
Follow the procedure described below when turning ON the power to the controller(IV-S31MX/S32MX/
S33MX), and the [POWER ON SETTING] menu will be displayed on the monitor.
1. Turn ON the power to the controller, while holding down the ESC key.
2. Keep pressing the ESC key down for approx. 9 sec., and the following menu will be displayed.
Operating procedure
3. Move the cursor to item " DISPLAY MODE" (display mode) with the up and down keys, and press
the SET key.
4. Move the cursor to "JAPANESE" or "ENGLISH" with the left and right keys.
5. Move the cursor to " OPERATION" using up and down keys and press the SET key. Then, again
press the SET key.
The screen will change to operation screen.
1-6 Power ON setting menu
[1] Operations menu lock
To prevent accidental changes to conditions you have set, the operation screen can be locked so that the
screen cannot be changed to setting screen. The operation can only be carried out on the [POWER ON
SETTING] menu.
Display procedure
Follow the procedure described below when turning ON the power to the controller (IV-S31MX/S32MX/
S33MX), and the [POWER ON SETTING] menu will be displayed on the monitor.
1. Turn ON the power to the IV-S30 controller, while holding down the ESC key.
2. Keep pressing the ESC key down for approx. 9 sec., after turning ON the power and the menu will
be displayed.
Operation procedure
1. On the [POWER ON SETTING] menu, move the cursor to item " MAIN OPS MENU" with the up
and down keys, and press the SET key.
2. Move the cursor to "UNLOCK" or "LOCK" with the left and right keys, and press the SET key.
3. Move the cursor to item " OPERATION" with the up and down keys, and press the SET key.
Press the SET key once more.
The IV-S30 saves the settings in the flash memory and the screen will return to the operation
screen.
Display when the operation screen is locked
3
5
4
[POWER ON SETTING]
1MAIN OPS MENU UNLOCK LOCK
2DISPLAY MODE JAPANESE ENGLISH
3OPERATION
［POWER ON SETTING］
1 MAIN OPS MENU UNLOCK LOCK
2 DISPLAY MODE JAPANESE ENGLISH
3 OPERATION
1 MAIN OPS MENU
Description
UNLOCK
LOCK
All of the operating conditions for the
IV-S30 can be changed.
The MAIN OPS MENU is locked and
no change can be made.
"LOCK" will be displayed
on the MAIN OPS MENU
T.IMG
C
1
L
LOCK FULL VX.X
(
TYPE
00)
AREA
1
OK
MEAS XXXXms
MEASURE 0 CAM1 POSI-DEVIATION
SEL
ESC
SET
TRG/BRT
SEL
ESC
SET
TRG/BRT