User`s manual

17-22
Setting the Input/Output Conditions
17
17-5 Computer link
When "PC-LINK" has been specified in item " OUT I/F (PARAL.)" on the "I/O CONDITIONS" screen
(page 17-1), the computer link conditions must be set on the "COMPUTER LINK" screen.
How to display the computer link setting screen
How to display the computer link setting screen
Select "MAIN COND" -> "SYS-CND" ->
"COMPUTER LINK," in that order.
The COMPUTER LINK screen will appear.
How to set up a computer link
PC MANUFACTURER, STATION NO.,
WRITE TOP ADRS
The details for " PC MANUFACTURER,"
STATION NO.," and " WRITE TOP
ADRS" are as follows.
CONTROL PROC. , BLK WRT COMMAND
When "MITSUBISHI" is selected on the " PC
MANUFACTURER" line, specify
" CONTROL PROC." and " BLK WRT
COMMAND."
See "Chapter 19: Computer Link" for applicable models made by these manufacturers.
Note 1: Use an even address as the write start address.
Note 2: When 512 bytes are used for a write register on a Sharp model, select a write start address
from the following addresses.
09000, 19000, 29000, 39000, 49000, 59000, 69000, 79000, 89000 , 99000
FORM 1: No line terminator
FORM 4: With line terminators
･ "CR" + "LF"
Setting detailsMenu
WW: Data writing address range
･ D0000 to D1023
QW: Data writing address range
･ D000000 to D008191
5 BLK WRT
COMMAND
4 CONTROL
PROC.
Write address
(max. 512 bytes)
Station No.
Item Setting range
- Sharp: 09000 to 99776
- Mitsubishi: D0000 to D9999
- OMRON: DM0000 to DM9999
- Yokogawa: D00001 to D16384
- Sharp: 00 to 37
(8) *
- Mitsubishi: 00 to 31
- OMRON: 00 to 31
- Yokogawa: 01 to 32
* In this book, octal notation is indicated by adding(8)
1 PC MANUFACTURER
2
STATION NO.
3
WRITE TOP ADRS
4
CONTROL PROC.
5
BLK WRT COMMAND
SYS-CND
I/O CONDITIONS
COMM.SET
COMPUTER LINK
GAIN-OFFSET
TIME
CAMERA TYPE
SELECT SYSTEM COND
F C1 BRT
SHARP(COMMPORT)
SHARP(LINK-MDL)
MITSUBISHI
OMRON
YOKOGAWA
1 PC MANUFACTURER SHARP(COMMPORT)
2
STATION NO. 01
3
WRITE TOP ADRS 09000
COMPUTER LINK SCREEN COND SAVE
F C1 BRT
1 PC MANUFACTURER MITSUBISHI
2
STATION NO. 00
3
WRITE TOP ADRS D0000
4
CONTROL PROC. FORM1
5
BLK WRT COMMAND WW
COMPUTER LINK SCREEN COND SAVE
F C1 BRT
FORM1
FORM4
WW
QW