User`s manual

17-25
Setting the Input/Output Conditions
17
F C1 BRTOBJ-TYPE I/O SCREEN SAVE
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
1 TRIG CCD START NO
2
SHUTTER SPEED 1/00060(1/30~1/10000)
3
SERIAL OUTPUT BLOCK-ASSIGN
4
SET SERIAL BLOCK BLOCK00 MEAS0 CAM1
5 CAM NO 1(1~2)
6
CALIBRATION NO
3. The " SET SERIAL BLOCK" line will appear.
Select this line and press the SET key. Enter the
block No., measurement No. and camera No. of
the measurement data to be output, using the left,
right, up and down keys.
- Specify a block number to be returned in
addition to block 0 (00). If block 00 is specified,
data from block 00 will not be returned a second
time. After the settings are complete, press the
SET key.