User`s manual

17-27
Setting the Input/Output Conditions
17
[2] Select "YES" or "NO" for output data
Select "YES" or "NO" on the following menu screens that are displayed as "locked" screens to output
serial data. See the next page for instructions about how to lock the screen.
On any condition setting screen, press the TRG/BRT key and the cursor will move to the upper function
menu. Select "SCREEN" and press the SET key. A popup menu will appear. Select "SERIAL
OUTPUT" and press the SET key.
- The "EVALUATION COND" screen for
individual measurement program
(When measuring positional deviation)
- The "DIST&AGL COND" screen
- The "NUMERIC CALC" or "FINAL NUM.
CALC" screen for individual measurement
program
(When the numerical calculation condition
menu is displayed)
SEL=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
[SERIAL OUTPUT]
1
X COORD(MDL0) NO
2 Y COORD(MDL0) NO
3 x DEVIATE(MDL0) NO
4 y DEVIATE(MDL0) NO
5 MATCH LVL(MDL0) NO
6 ANGULAR DEVIATE NO
7 X COORD(MD1) NO
8 Y COORD(MDL1) NO
9 x DEVIATE(MDL1) NO
0 y DEVIATE(MDL1) NO
q MATCH LVL(MDL1) NO
EVALUAT COND SCREEN SAVE
F C1 BRT
NO
YES
[SERIAL OUTPUT]
1 OUTPUT
NUMERIC CALC SCRREN SAVE F C1 BRT
NO
[SERIAL OUTPUT]
1 DISTANCE EVALUATION
DIST&AGL COND SCREEN SAVE F C1 BRT
NO
(To measure an object's "distance" on the distance and angle condition menu)
- When the serial output setting is "NO," no data
(block 0) will be output (the space will be filled by
the next item).