User`s manual

19-6
Computer Link
19
Note: If a registration number has not been used yet, the data for the next registered number will be
brought forward.
1
Registration
No. 0
Registration
No. 1 to 7
X
Y
X
Y
Provided
Provided
Provided
Provided
Provided
Provided
2
2
2
2
2
2
None
None
1
1
1
1
Block Item Sign (+/-)
No. of
bytes
Decimal point
(digit)
1st point
2nd point
The registration No. 1 to 7 contain the same data as the
registration No. 0.
Degree of
match
1st
point
2nd
point
Deviation
amount
[2] Contents of the measurement result block (for each measurement function)
(1) Positional deviation measurement
* When a sign is provided, if the highest-order bit of the data is ON (1), a "-" minus sign is used, and if
the bit is OFF (0), a "+" pulus sign is used. The value (decimal) is expressed two's complement
notation. (A two's complement number is obtained by inverting the 0s and 1s in a binary number
and adding 1.)
Note: If a registration number has not been used yet, the data for the next registered number will be
brought forward.
Example of the data in block 0: Only registration No. 0
- These data are in hexadecimal. They are converted to the actual decimal measurements as shown
below.
0
Registration
No. 0
Registration
No. 1 to 7
X
Y
X
Y
None
None
None
None
Provided
2
2
2
2
2
1
1
1
1
1
Block Item Sign (+/-)
No. of
bytes
Decimal point
(digit)
1st point
(center coordinates)
2nd point
(center coordinates)
Angular deviation
*
The registration No. 1 to 7 contain the same data as the
registration No. 0.
082005280FA00EB0FF76
X
Registration No. 0
Y X Y
Angular
deviation
Center coordinates
of 1st point
Center coordinates
of 2nd point
Center coordinates
of 2nd point
Center coordinates
of 1st point
Angular deviation
X
Y
X
Y
820
528
FA0
EB0
FF76
2080
1320
4000
3760
—138
208.0
132.0
400.0
376.0
—13.8
Data
(hexadecimal)
Decimal
number
Measurement
result (value)