User`s manual

1-22
Setting and Operating Outline
1
(2) Displaying images on the NG image display screen(IV-S32MX/S33MX)
When the IV-S32MX/S33MX is used, move the cursor to the menu bar "SCREEN-CHG" on the
operation main screen (page1-10) and press the SET key. Select the "NG-IMG-DISP" from pop-up
menu. The screen will change to the NG image display. When the measurement stops, the NG image
will be displayed.
- To display NG images while measuring, display them on the operation main screen. - See page 1-18.
Note: Please be aware of the following.
1. Change the image display mode in the upper right of the screen to "F.IMG" (freeze image)
by pressing the SET key.
2. You cannot measure objects while an NG image is being displayed on the NG image
display screen.
Display the NG image number and
the number of NG images that
have been registered.
The NG image number can be
selected by selecting "NEXT-NG"
on the menu bar.
Displays the date and time the NG
image was captured.
Example: 2000-10-01 10:25
October 1st, 2000,
AM10:25.
Menu bar
When "CAM1&2" is selected on the " MONITOR OUTPUT" line (TYPE RUN COND
menu), the camera numbers (CH) will be displayed on the screen next to the images from
those cameras.
rabuneM sliateD
AEM-GHC
)tnemerusaemegnahc(
tnemerusaemehtrofyalpsidtlusernoitaulaveehtegnahC
.syeknwoddnapuehtgnisusrebmun
1MAC0ERUSAEM( fi 2MAC0ERUSAEM fi 1TNEMERUSAEM fi
2TNEMERUSAEM fi 3TNEMERUSAEM fi 4TNEMERUSAEM fi)
GHC-DNOC
tnemerusaemegnahc(
)noitidnoc
GNyalpsiD".syeknwoddnapuehtgnisuunemnoitarepoehtegnahC
"egami fi snoitidnocnoitaulaveegnahc fi 01-2egaP
".SEY"ottesebtsumyalpsidneercsgnitarepoehT-
- .01-2egapeeS
,neercsegnahcnoitidnocnoitaulaveehttuobanoitamrofniroF-
.6-1egapees
.yekTESehtsserp,neercsegnahcnoitidnocnoitaulaveehtnO-
.neercsegnahcgnittesehtotevomlliwrosrucehT
GER-GNHC
)retsigeregnahc(
nisrebmunderetsigerehtfoyalpsidtlusertnemerusaemehtegnahC
.syeknwoddnapuehtgnisumargorptnemerusaemeht
GN-TXEN
)egamiGNegnahc(
deyalpsidgniebegamiGNehtrofrebmunderetsigerehtegnahC
.syeknwoddnapuehtgnisu - .egaptxenehteeS
MAXE-ER
)yalper(
htiwdetcelesegamiGNehtnoedamstnemerusaemehtyalpeR
.yekTESehtgnisserpyb,"GN-TXEN"
GNLED
)egamiGNeteled(
lliw"GN-TXEN"htiwdetcelesegamiGNehtylnO.yekTESehtsserP
.deteledeb
llaeteled(NLLALED
)segamiGN
.deteledeblliwsegamiGNderetsigerehtllA.yekTESehtsserP
UNEM-SPO .neercsniamnoitarepoehtotnruterlliwneercseht,yekTESehtsserP
（TYPE00）
V*.**
MEAS
×××× ms 2001-10-14 10:38
X0~7
□□□□□□□□ Y0~7 □□□□□□□□ READY ■ X:360 Y:350
MNU-CHG CHG-MEA COND-CHG CHNG-REG NEXT-NG RE-EXAM DEL NG
MEASURE 0 CAM1 POSI-DEVIATION
OK
*2
Displayed when the menu is changed.
MNU-CHG OPS-MENU DEL ALL NG
4
F CH DRK ○
NG-IMG 0 (1P)
2001-11-01 10:25
1
2
3