User`s manual

2-6
Setting the Operating and System Conditions
2
[4] Pattern display
Select "YES" or "NO" to determine whether to show the
pattern display (solid lines and dashed lines of the
rectangles in the window) over an image displayed on
the operation screen.
Note: When the "CAM1&2(HORIZ/VERT)" or "CAM1&
NG IMG(HORIZ/VERT)" is selected on the
" MONITOR OUTPUT" (page 2-2), pattern
display cannot be selected.
Display examples
F C1 L
VX.X
(TYPE00)
OK
MEAS XXXXms XXXX-XX-XX XX:XX
MEASURE 0 CAM1 POSI-DEVIATION
X0~7 Y0~7 READY
REGST. NO. 0(0~7)
X0=176.0 OK
Y0=322.0 OK
x0=+000.0 OK
y0=+000.0 OK
M0=+10000 OK
B0=+001.7 OK
X1=534.0 OK
Y1=480.0 OK
x1=+001.0 OK
y1=+001.0 OK
M1=+09999 OK
F C1 L
VX.X
(TYPE00)
OK
MEAS XXXXms XXXX-XX-XX XX:XX
MEASURE 0 CAM1 POSI-DEVIATION
X0~7 Y0~7 READY
REGST. NO. 0(0~7)
X0=176.0 OK
Y0=322.0 OK
x0=+000.0 OK
y0=+000.0 OK
M0=+10000 OK
B0=+001.7 OK
X1=534.0 OK
Y1=480.0 OK
x1=+001.0 OK
y1=+001.0 OK
M1=+09999 OK
- When "YES" is selected for PATTERN DISPLAY.
- When "NO" is selected for PATTERN DISPLAY
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPEMNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
1 MONITOR OUTPUT CAM1
2 CAPTURE IMG PARTIAL-IMG
3 MESSAGE DISPLAY YES(NUMERIC)
4 PATTERN DISPLAY YES
5 SHOW BINARY IMG YES
6 SHOW θ FIX IMG YES
7 OPS MAIN DISP YES
8 DISP CHG-EVAL NO
9 PC-MNTR NO
0 THROUGH DISPLAY NO
q EXTENSION FUNC. NO
TYPE RUN COND SCREEN SAVE F C1 BRT
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
YES
NO
YES
NO
PATTERN
DISPLAY
Description
Displays patterns in the window, such
as the rectangles defined for the
inspection area and the search area.
Patterns will not be displayed
on the operation screen.