User`s manual

2-18
Setting the Operating and System Conditions
2
[2] Image capture mode (IV-S33MX)
When you are using the IV-S33MX controller and IV-S30C3/C4 high-speed camera or an EIA camera,
you have to select an image capture mode.
* The "Full+half" can be selected when " SELECT CAMERA" is set to "HIGH-SPEED."
Comparative examples of image capture times
When a standard camera is used and the partial image size is 50 % (240 lines / 480 lines).
When a high-speed camera is used and the partial image size is 50 % (240 lines / 480 lines).
Processing details of the image capture mode
edomerutpacegamI sliateD
lluFegamiehtnisenilehtfollaerutpaC
flaHegamiehtnisenilsddoehterutpaC
*flah+lluF
seniltegrattnemerusaemeht,edomegamilaitrapehtnI
edomflahnierasrehtoehtdnaedomllufniera
erutpacegamI
edom
lluF flah+lluF flaH
erutpacegamI
ehtrefsnarT-
senildeificeps
ehtylnorefsnarT-
aeraedomlluf
aeradeificepsehttcerroC-
refsnartdna
lliwegamienilneveehT-
ehtybdetnemelppuseb
.egamienilddo
pugnittesrofssecorP
neercseht
ehtfollatuP-
aeraenilderutpac
edomllufehtni
ehtfollatuP-
aeraenilderutpac
edomllufehtni
enilderutpacehtfollatuP-
.edomflahehtniaera
otnurmorfssecorP
neercsehtpugnittes
---
flahehteteleD-
aeraedom
---
Whole image
(full mode)
33.3 ms 16.7 ms
Partial image
(full mode)
Image
capture time
- For details about whole and partial images - See page 2-4.
Whole image
(full mode)
16.7 ms 12.5 ms 8.3 ms 8.3 ms 4.2 ms
Partial image
(full + half mode)
Whole image
(half mode)
Partial image
(full mode)
Partial image
(half mode)
Image
capture time