User`s manual

2-22
Setting the Operating and System Conditions
2
2-5 Option
With the IV-S30, you can initialize the measurement settings, and run a self-diagnosis from the option
menu.
Setting method
1) Display the "OPTION" from the "MAIN MENU."
2) Select the operation you want, such as
" INITIALIZATION" or " SELF DIAGNOSIS."
INITIALIZATION
Select any of the "ALL-INT" (initialize both FROM and RAM), "INT-RAM" or "NG-IMG-INT"(IV-
S32MX/S33MX) and the following message will appear.
MEM INIT?(YES=[SET], NO=[ESC] )
Press the SET key to start the initialization. The bar shown below will appear and display the
progress of the initialization.
After the initialization is complete, the word "INITIALIZING" will change to "COMPLETE INIT."
Press the ESC key to return to main screen.
SELF DIAGNOSIS
Select " SELF DIAGNOSIS" and press the
SET key twice. The controller will execute a self-
diagnosis and display the results of the
diagnosis, as shown right. If the diagnosis results
are normal, "OK" will be displayed. If the results
are abnormal, "NO" will be displayed.
When the diagnosis is complete, the
"DIAGNOSING" display will change to
"COMPLETE DIAGNOSIS ."
F C1 BRTMAIN MENU
IVS3*MX
SYS-CND
OBJECT TYPE COND
SET WIZARD
EDIT MAIN OPS MENU
OPTION
OPTION SCREEN SAVE F C1 BRT
1 INITIALIZATION
ALL-INIT INIT-RAM NG-IMG-INIT
2
SELF DIAGNOSIS EXEC
Displayed when the controller
is the IV-S32MX/S33MX
OPTION SCREEN SAVE F C1 BRT
1 INITIALIZATION
ALL-INIT INIT-RAM NG-IMG-INIT
2
SELF DIAGNOSIS EXEC
VRAM OK
SDRAM OK
TIME OK
TYPE COND
OK
REFFERENCE IMG OK
BOOT-PROG OK
SYSTEM-PROG OK
DIAGNOSING
SET=EXEC ESC=BACK SEL=CHNG IMG TRG=FUNC
When the diagnosis is complete, the
"DIAGNOSING" display will change to
"COMPLETE DIAGNOSIS ."
REFERENCE IMG
SYSTEM I/O
OBJECT TYPE COND
INITIALIZATION
■■
■
■■■■■■■□□□