User`s manual

Setting Measurement Conditions
3-8
3
Window specifications
- Horizontal lines
- Vertical lines
When setting the horizontal and vertical lines, specify the line length as follows:
The reference image must shorter than the search area lines.
(3) Circle window
How to set a circle window
The following items on the settings menu can be used to define the circle window: CENTER,
RAD. Shown here is an example of how to define a solid line circle window.
(4) Elliptical window
Line type
Solid lines
Dotted lines
Image processing used
Window containing a
binary image
Binary image window
mask
Measurement programs
Area measurement by binary conversion, object counting by
binary conversion, object identification by binary conversion
Area measurement by binary conversion, object counting by
binary conversion, object identification by binary conversion
- Up key
1. Specifying the center
2. Specifying the radius
- Down key
- Up/right key - Down/left key
- Left key - Right key
Line type
Solid lines
Dotted lines
Image processing used
Window containing a
binary image
Binary image window
mask
Measurement programs
Area measurement by binary conversion, object counting by
binary conversion, object identification by binary conversion
Area measurement by binary conversion, object counting by
binary conversion, object identification by binary conversion
Line type Move Length
Min.
length
Max.
length
Reference image Solid line
Horizontal direction: One pixel at a time
Vertical direction: One pixel at a time
In units
of pixels
8
pixels
512
pixels
Search area Dotted line
Line type Move Length
Min.
length
Max.
length
Reference image Solid line
Horizontal direction: One pixel at a time
Vertical direction: One pixel at a time
In units
of pixels
8
pixels
480
pixels
Search area Dotted line