User`s manual

Setting Measurement Conditions
3-20
3
[5] Image pre-processing
A comparative calculation between images, gray level changes, and space filter are available for image
pre-processing.
How to get to the "IMG PRE-PROC" screen
Select "OBJECT TYPE COND" and then "TYPE00"
or "TYPE(NEW)" on the "MAIN COND" screen.
Then select "MEA-CND(CAMERA1)" and "MEAS"
to open a measurement screen. At the " MEAS
SELECTION" item, press the SET key and choose
a measurement program from the popup menu.
Note: If the " MEAS SELECTION" is set to "NO,"
the image pre-processing cannot be specified.
Press the ESC key to return to the OBJECT TYPE
COND screen. Then select "IMG PRE-PROC."
Note: If the NG image registration function is speci-
fied, "MEA-CND(CAMERA2)" will change to "MEA-
CND(NG-IMGS)" and Camera 2 cannot be se-
lected.
The "IMG PRE-PROC" screen will appear.
For details about "COMPARE IMGS" (compare
images), see page 3-21.
For details about "CHNG GRAY LEVEL"
(change gray level), see page 3-23.
For details about "SPACE FILTER," see page
3-24.
Note: If the NG image registration function is specified, only "CAM1" can be selected for the
" COMPARE IMGS" function.
MEASUREMENT 1 SCREEN COND SAVE
1 MEAS SELECTION POSI-DEVEATION
NO
POSI-DEVIATION
CHK-DEG-MATCH
INSPECT-LEAD
INSPECT-BGA/CSP
MEAS-BIN-OBJ
CNT-BIN-OBJ
LABEL-BIN-OBJ
POINT-MEAS
MALTI-POSI
MULTI MATCHES
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0(POSI-DEVIATION)
IMG PRE-PROC
MEAS CND
EVALUATION COND
DISTANCE&ANGLE COND
NUM-CALC
OUT-COND
POSI-CORRECT
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM.CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
TYPE(NEW)
+
+
+
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
1 COMPARE IMGS
2 COMP IMGS COND
3 CHNG GRAY LEVEL
4 CONTRAST MAGNI
5 SPACE FILTER
6 NUM.OF FILTER
SELECT OBJECT TYPE COND
F C1 BRT
IMG PRE-PROC SCREEN COND SAVE F C1 BRT
1
COMPARE IMGS NO
2
CHNG GRAY LEVEL NO
3
SPACE FILTER NO
IMG PRE-PROC
MEAS CND
EVALUATION COND
DISTANCE&ANGLE COND
NUM-CALC
OUT-COND
POSI-CORRECT
MEAS(NEW)
MEA-CND(NG-IMGS)
FINAL NUM.CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
TYPE(NEW)
+
+
+
6
1COMPARE IMGS NO
NO
CAMERA1
noitaluclacevitarapmoC
segamineewteb
ecnereferdna1aremacneewteb(ecnereffidfoeulavetulosba,gnitcartbuS
dna1aremacneewteb,egamiecnereferdna2aremacneewteb,egami
)2aremac
segnahclevelyarG
,gnissecorp"n"ybnoitacifingaM g ,gninediwmargotsih,noitcerroc)-/+(
sisahpmeegnardim
retlifecapS
latnoziroh,noitcartxeegde,sisahpmeegde,)egareva/retnec(gnihtoomS
egdelacitrev,egde