User`s manual

Setting Measurement Conditions
3-34
3
[9] Title registration
A title for a object type number can be entered and saved when the object type number is displayed on the
screen.
Purpose
The title is used to make it easier to control the details of the settings for the object type.
Title characters
A maximum of 16 letters and symbols may be entered.
Operation method
Select "OBJECT TYPE COND" on the "MAIN
MENU" screen and then select "TYPE00" (the cur-
rent type). Then press the "TRG/BRT" key. Select
"TITLE" from the popup menu and press the SET
key.
The title that has been entered will be displayed
in the top left corner of the operation screen and
"SELECT OBJECT TYPE COND" screen.
STORE OBJCT
TITLE
A to Z
0 to 9
= to >
SP (space bar)
← →
DEL. (delete)
END
These characters and symbols are
used to enter the title name.
This is used to make spaces.
These are used to move the cursor.
This is used to delete the character
to the right of the cursor.
Exit the title registration screen.
Setting details
+
SELECT OBFECT TYPE COND F C1 DRK
OBJECT TYPE COND
TYPE00
OPS-MENU
SAVE
COPY
PASTE
DEL
SPECIFY NUMBER
TITLE
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789
--()<>SP
←→DEL END
AREA＿
STR OBJ TITLE SCREEN SAVE
F C1 DRK
OK
(TYPE00) AREA
MEAS
XXXX
ms 2001-10-14-10:38
MEASURE 0 CAM1 POSI-DEVIATION
F C1 DRK
V*.**
Operation screen
OBJECT TYPE COND
TYPE00(AREA)
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0(POSI-DEVIATION)
IMG PRE-PROC
MEAS CND
EVALUATION COND
DISTANCE&ANGLE COND
+
+
SELECT OBJECT TYPE COND
F C1 BRT
SELECT OBJECT TYPE COND screen