User`s manual

Setting Measurement Conditions

3-38

The measurement conditions of

the source object type. (The data

is copied from flash memory)

The measurement conditions of the target

object type. (The data is used to simplify

setting the target object's parameters)

The source of the copy The target of the copy

SELECT OBJECT TYPE COND

F C1 DRK

OBJECT TYPE COND

TYPE00

SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP

OPS-MENU

SAVE

COPY

PASTE

DEL

SPECIFY NUMBER

TITLE

[3] Copying

When there are many common parameters between object types, it is most efficient to access those

existing sets of parameters in order to copy and then modify them.

The parameters of a previously specified object type are copied into another object type, after which they

can be modified.

Operation procedure

On the "MAIN MENU" screen, select "OBJECT

TYPE COND" and then "TYPE00" (current type). At

this point, press the TRG/BRT key to display the

popup menu. Select "COPY" from the popup menu

and press the SET key.

Notes

- Do not disconnect the power while the IV-S30 is copying.

- Once data has been corrupted it will be necessary to start after initializing the setting, all over

again. Unless this is done it will not be possible to restart the machine.

- The reference images used for the gray scale seach function are not copied with the

operation above. Make sure reset them.