User`s manual

Setting the Conditions for Each Object Type
3-39
3
[4] NG image registration (IV-S32MX/S33MX)
You can register the NG image (by final evaluation result) while operating the IV-S32MX/S33MX.
Select " REGST NG IMG" of the "OBJ-TYPE SYS." screen for the setting.
Setting method
1. Select "TYPE00" and then "OBJ-TYPE SYS" on
the SELECT OBJECT TYPE COND screen.
2. Select " REGST NG IMG" (register NG
images) and press the SET key. Then, select
"YES" from the popup menu.
* A maximum of 128 images can be stored in REGST NG IMG, but the actual number may be
smaller, depending on the size of the images to be registered.
[Limit] When the image size is at the maximum allowed (512 X 480 pixels per screen), a total of
8 images can be stored (1,966,080 pixels = 512 X 480 X 8).
In another example, if the NG image size is 256 X 240 pixels, a maximum of 32 images of that size
can be registered. (256 X 240 X 32 = 1,966,080)
- When the "REGST NG IMG" (NG image registration) is set to "YES" and an NG occurs while
measuring, the controller will register the image as an NG image automatically.
GMIGNTSGER
SEY
.segamiGNretsigeR
derotsebnactahtsegamiforebmunmumixamehtsi*821-
segamiforebmunlatotfI.)721ot0srebmunegamiGN(
egamiGN(deteledeblliwegamitsedloeht,821sdeecxe
.)ylgnidroccadetfihseblliwsrebmun
ON.derotsebtonlliwsegamiGN
1
Description
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEA-CND(CAMERA2)
FINAL NUM.CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
TYPE(NEW)
+
SELECT OBJECT TYPE COND F C2 BRT
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
1
REGST NG IMG
2
HALT ON NG MEAS
3
MNTR LIGHT LVL(CAM1)
4
LIGHT LV COND
5
MNTR LIGHT LVL(CAM2)
6
LIGHT LV COND
7
MOVE ALL WINDOW
1
REGST NG IMG YES
2
HALT ON NG MEAS NO
3
MNTR LIGHT LVL(CAM1) YES
4
LIGHT LV COND (TO NEXT SUB-BENU)
5
MOVE ALL WINDOW (TO NEXT SUB-MENU)
YES
NO
OBJ-TYPE SYS. SCREEN SAVE
F C1 BRT