User`s manual

11-3
Multiple Positional Measurement
1111
1111
11
DTECT PRECISION
Select detection precision. You can select one
of two levels (standard/high), according to
your conditions, the desired precision level for
detection results, and the detection speed.
For details, see page 3-9.
REGISTER NO.
4 registers are available for the multiple
position measurement (Registers 0 to 3).
If you want to set the measurement conditions
for a different register number, press the SET
key to highlight the register number currently
selected. Then press the up and down arrow
keys to select the register number whose
measurement conditions you want to set.
Press the SET key to confirm your selection.
MODE
Select a mode.
The details of each mode are as follows.
DETECT ORDER (when GRAY-SRC is selected)
When "GRAY-SRC" is selected on line " MODE," select "SCAN-ORDER" or "MATCH LVL" on
the " DETECT ORDER" line.
SCAN-ORDER (in the order scanned): Searches in the order scanned.
MATCH LVL (degree of match): Searches by comparing levels with the reference image.
REGISTER NO. ( DTECT OBJECT)
Shows the specified mode(s) for each register.
S: gray search E: edge detection ×: means no setting
MEAS CND SCREEN COND SAVE
1
DTECT PRECISION STANDARD
2
REGISTER NO. 0(0~3)
3
MODE GRAY-SRC
4 DETECT ORDER SCAN-ORDER
REGISTER NO.
5
DTECT OBJECT
15141312111009080706050403020100
× S× ×
F C1 DRK
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
STANDARD
HIGH
NO
GRAY-SRC
EDGE DTECT
SCAN-ORDER
MATCH LVL
ON .edamsitnemerusaemoN
CRS-YARG
tahtsegamiderutpacehtniepahsatcetedotnoitcnufhcraesyargehtsesU
.egamiecnereferehtsehctam
TCETDEGDE
tahtsegamiderutpacehtnisepahsrofkoolotnoitcnufnoitcetedegdeehtsesU
.eulavdlohserhtdeificepsehtnahtregraleulavaevah
00102030
SES
×