User`s manual

11-8
Multiple Positional Measurement
1111
1111
11
SEARCH AREA
Select " SEARCH AREA" and press the SET key to go to the setting screen.
When "RECTANGLE" is selected
Highlight " UP.L" and press the SET key.
The X and Y axes will appear in the search
area. Move the X/Y axes using the up/down/
left/right arrow keys to identify the upper left
corner. When correct, press the SET key.
- To return to the previous coordinates, press
the ESC key.
Next, highlight " LO.R" and press the SET
key. Identify the lower right corner the same
way.
DTECT MODE
Select an image processing method for the
edges.
CHNG POINT
DRK → BRT
BRT → DRK See page 3-14.
CENT (BRT)
CENT (DRK)
SEARCH DIRECT
Specify a search direction. The direction for searching varies with each detection shape.
When "RECTANGLE" is selected
When "LINE" is selected
When "CIRC-L" or "ELIP-L" is selected
For details, see page 3-14.
RECTANGLE RESET RETURN
1 UP.L (224.208)
2 LO.R (287.271)
3 MOVE
SET=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
X：224 Y：208
F C1 BRT
Horizontal (→→
→
→→) Scan the reference line from left to right（→）
Horizontal(←←
←
←←) Scan the reference line from left to right（←）
Vertical (↓↓
↓
↓↓) Scan the reference line from top to bottom（↓）
Vertical (↑↑
↑
↑↑) Scan the reference line from bottom to top（↑）
Start point →→
→
→→ End point Scan along a straight line from the starting point to the end point
End point →→
→
→→ Start point Scan along a straight line from the end point to the starting point
Clockwise direction Scan around the circumference clockwise
Counter-clockwise direction Scan around the circumference counter-clockwise