User`s manual
Distance and Angle Measurement
13-4
13
Selection Description Measurement position Display on the screen
NO Do not select auxiliary
point.
MID-PNT The center point is the
coordinate half way
between points 1 and 2
that are specified on 4
and 5 (COND. 1 and
2).
CIRC-C The center of the circle
is the central coordinate
of three points
positioned on the
circumference of the
circle that are specified
between 4 and 6
(conditions 1 to 3).
GRAV the center of gravity
between points 1 to 3
that are specified
beween 4 and 6 is
calculated as the mean
of the three coordinates
(conditions 1 to 3).
LINE-2P The line passing
through two points is
the line that passes
through points 1 and 2
specified in items 4
and 5 (COND.1/2).
In this system, the
angle of the slope is
referred to as a
negative angle if it is W
from the horizontal (X
axis), and as a positive
angle if it is CCW from
the horizontal (X axis).
INTERS-
ECTN
The intersection of two
lines is the point where
lines 1 and 2, specified
in items 4 and 5
(COND.1/2),cross.
3
AUXILIARY INTERSECTN
4
COND.1 AUX NO
5
COND.2 AUX NO
[TEST RESULT] [OUTPUT]
6
AUX JUDGEMENT1 000.0~511.0 X= NO
7
AUX JUDGEMENT2 000.0~479.0 Y=
8
RUN A TEST EXEC
3
AUXILIARY LINE-2P
4
COND.1 REG NO MDL 0
5
COND.2 REG NO MDL 0
[TEST RESULT] [OUTPUT]
AUX.1:SLOPE ANGL 000.0~511.0 d1=
AUX.2:Y INDENT 000.0~479.0 Y=
6
RUN A TEST EXEC
3
AUXILIARY GRAV
4
COND.1 REG NO MDL 0
5
COND.2 REG NO MDL 0
6
COND.3 REG NO MDL 0
[TEST RESULT] [OUTPUT]
7
AUX JUDGEMENT1 000.0~511.0 X= NO
8
AUX JUDGEMENT2 000.0~479.0 Y=
9
RUN A TEST EXEC
3
AUXILIARY CIRC-C
4
COND.1 REG NO MDL 0
5
COND.2 REG NO MDL 0
6
COND.3 REG NO MDL 0
[TEST RESULT] [OUTPUT]
7
AUX JUDGEMENT1 000.0~511.0 X= NO
8
AUX JUDGEMENT2 000.0~479.0 Y=
9
RUN A TEST EXEC
3
AUXILIARY MID-PNT
4
COND.1 REG NO MDL 0
5
COND.2 REG NO MDL 0
[TEST RESULT] [OUTPUT]
6
AUX JUDGEMENT1 000.0~511.0 X= NO
7
AUX JUDGEMENT2 000.0~479.0 Y=
8
RUN A TEST EXEC
Line 1
Line 2
Intersection
Point 1
Point 2
Point 3
Center of the circle
Point 1 (X1, Y1)
Point 3 (X3, Y3)
Center of Gravity
,
X1+X2+X3
3
Y1+Y2+Y3
3
Point 2 (X2, Y2)
＋
＋
512
480
Zero position (0, 0)
Slice through the Y axis
(Y axis coordinate)
Point 2
Point 1
Y
X
Slope ( )
X axis
Y axis
Image display
area
(Units used above: Pixel)
Coordinates (511, 479)
Line passing through
two points
Point 1 (X1, Y1)
Point 2 (X2, Y2)
Center point
,
X1+X2
2
Y1+Y2
2
(1) When "AUX" is selected.
AUXILIARY NO.
Enter a register number. The register numbers
available are 0 to 15.
AUXILIARY
Select an auxiliary point.
DIST&AGL COND SCREEN COND SAVE F C1 BRT
NO
MID-PNT
CIRC-C
GRAV
LINE-2P
INTERSECTN
1
OBJ AUX
2
AUXILIARY NO. 01(0~15)
3
AUXILIARY CIRC-C
4
COND.1 REG NO MDL 0
5
COND.2 REG NO MDL 0
6
COND.3 REG NO MDL 0
[TEST RESULT] [OUTPUT]
7
AUX JUDGEMENT1 000.0~511.0 X= NO
8
AUX JUDGEMENT2 000.0~479.0 Y=
9
RUN A TEST EXEC