User`s manual

16-21
Setting the Input/Output Conditions
16
16-4 Setting for serial communications
When "PARALLEL+SERIAL" (general purpose serial) has been specified in item " MEAS INP I/F"
on the "I/O CONDITIONS" menu (page 16-1), and when "SERIAL" or "PC-LINK" has been specified
in item " OUT I/F (PARAL.)" the serial communication conditions must be set on the "COMM.SET"
screen.
Set the items to match the communication conditions of the other device.
Select "MAIN COND" -> "SYS-CND" ->
"COMM.SET," in that order.
How to set the communication settings
Adjust each item to match the equipment used
to communicate.
COMM. STANDARD
Select "RS232C," "RS422:4LINE," or
"RS422:2LINE."
BAUDRATE (kbps)
Set the communication speed: 2.4 Kbps, 4.8
Kbps, 9.6 Kbps, 19.2 Kbps, 38.4 Kbps, 57.6
Kbps, or 115.2 Kbps.
NO.OF DATA BITS
Select either 7-bit or 8-bit.
PARITY CHECK
Select "EVEN," "ODD," or "NO."
NO.OF STOP BITS
Set it to 1-bit or 2-bits.
STATION NO.
Select the station number for communication using the up and down arrow keys.
SET=TO=NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
SYS-CND
I/O CONDITIONS
COMM.SET
COMPUTER LINK
GAIN-OFFSET
SELECT SYSTEM COND
F C1 BRT
1 COMM.STANDARD
2
BAUDRATE(k.bps)
3
NO. OF DATE BITS
4
PARITY CHECK
5
NO. OF STOP BITS
6
STATION NO.
F C1 BRTCOMM.SET SCREEN COND SAVE
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
1 COMM.STANDARD RS232C
2
BAUDRATE(k.bps) 115.2
3
NO. OF DATE BITS 7BIT
4
PARITY CHECK EVEN
5
NO. OF STOP BITS 2BIT
6
STATION NO. 00(0~7F)
RS232C
RS422:4LINE
RS422:2LINE
7BIT
8BIT
2BIT
1BIT
EVEN
ODD
NO
2.4
4.8
9.6
19.2
38.4
57.6
115.2