User`s manual
5-2
5-2 Installation of basic/expansion rack panel
This section explains the installation method of the basic/expansion rack panel in a control panel.
Fix the basic/expansion rack panel on a partition plate of a control box. Select the appropriate fixing
place taking into consideration the size of a wiring duct, wiring to the JW300, a cable length of the I/O
expansion cable, ventilation, maintenance, easy access for exchanging modules etc.
We recommend that you install the basic rack panel at the bottom and the expansion rack panel above
the basic rack panel.
Note: Use a high conductive partition plate of plating finish for fitting the basic/expansion rack panel so as
to increase noise tolerance.
[1]
Installation dimensions of basic/expansion rack panel
A
1
A
2
A
3
A
3
B5
B7
B6
B
1
B
2
B
3
B
4
4
kcarcisaB
lenap
)mm(snoisnemidnoitallatsnI
fossenkcihT
ebotnoitrop
detresni
)mm*
1A 2A 3A 1B 2B 3B 4B 5B 6B 7B
BK413-WJ5.1625.542
8031811846
f6
3R6.1
BK613-WJ5.2335.613
BK813-WJ5.3045.783
noisnapxE
kcar
lenap
)mm(snoisnemidnoitallatsnI
fossenkcihT
ebotnoitrop
)mm*detresni
1A 2A 3A 1B 2B 3B 4B 5B 6B 7B
BZ43-WJ622012
8031811846
f6
3R6.1
BZ63-WJ792182
BZ83-WJ863253