User`s manual

6-2
6-4 How to set ladder monitor
Start up the ZM-71SE software and set according to the setting procedures below.
Copy screen data of the basic screen data [LADDER82.Z71] to set a ladder monitor.
On the software tool bar, select "File" → "File Manage" → "Screen data file" in that order.
Select "LADDER82.Z71" (basic screen data) in the Copy Source column, and enter file name (Ex.
"TEST.Z71") in the Copy Target column and click the "OK" button. (See the figure above.)
[1] Copy multi overlap No. 0
Click the icon of the multi overlap No. 0 of the source data, and drag (draw while pressing down the left
mouse button) to the No. 0 position of a copy destination. Now the copying is complete.
This will be a button switch used to the display ladder monitor screen.
[2] Copy multi overlap No. 1
Same as the procedures above, copy No. 1.
This will be a button switch to display numeric keys to enter the coil number.