User`s manual

6-10
(5) Set a switch in order to display numeric keys that are used to enter the coil number on the screen.
This paragraph describes an example of setting the switch named "coil number search" shown with
arrow B on page 6-8.
Operation: Press this switch and the overlap No. 1 is displayed on the screen. Enter any coil/
TMR/CNT number using the numeric keys, and press "Search" on the numeric key
display. The LCD control terminal searches the entered coil/TMR/CNT number and
displays a ladder chart of one network in which the specified coil/TMR/CNT is con-
tained.
Setting:
Enter "Multi-Overlap: O:1M:1" on the function column.
This is to set a switch to display a multi overlap screen of the multi No. 1 using overlap No. 1
from No. 0 to 2.
This switch is used only to display the overlap screen.
(The detailed settings are not required.)