User`s manual

6-11
(6) Set a switch that is used to search and display a ladder chart linking with the relay mode.
Arrange a switch on the screen and set the following on the switch dialog.
The below describes setting a switch named "ERR LINK" that is encircled by an ellipse on the figure
above.
Operation: Press this switch, and if an error message occurs, the LCD control terminal displays
overlap No. 0 and searches a coil linking with the relay mode memory, and displays a
ladder chart of one network having this coil.
Setting:
Do not select any on the "Output Memory" and "Lamp Memory" items, and select "No
Function" in the Function column.