User`s manual

6-15
6-5 Description of ladder monitor screen data
6-5-1 Display area for ladder chart display
Specify [Display Area] inside the multi overlap with the following details.
The basic screen "LADDER82.Z71" corresponds to multi overlap No. 0.
6-5-2 Macro for display ladder chart
[1] List of macro commands to display ladder chart
Special commands with dedicated use for display ladder charts are listed below.
Use for macro block No. 0 to 13 of the basic screen "LADDER82.Z71" and ON macro in the switch.
Item Set detail
Division No. 0
Foreground White (recommending)
Background Blue (recommending)
Tile None (recommending)
□ Ladder Monitor display
Put a check mark in the check box.
SET
ー
LDR
command name
Details
UP
ー
SCROLL
Scroll up: Moves the cursor up
If the cursor is at the upper end of a circuit, moves to the previous
circuit.
DW
ー
SCROLL
Scroll down: Moves the cursor down
If the cursor is at the upper end of a circuit, moves to the
previous circuit.
L
ー
SCROLL
Scroll left: Moves the cursor left.
R
ー
SCROLL
Scroll right: Moves the cursor right.
FIND- Search (-): Searches for contact points in negative direction.
FIND+ Search (+): Searches for contact points in positive direction.
F
ー
RETURN Search return: Returns to the ladder circuit searched before (up to 8 times.)
BF
ー
FIND
Search previous circuit: Displays the previous circuit of the currently
displayed circuit.
NX
ー
FIND Search next circuit: Displays the next circuit of the currently displayed circuit.
T
ー
FIND
Detect contact point touched: Recognizes which contact point is pressed on
the circuit.
MEM
ー
FIND Search switch lamp memory: Searches with the lamp memory.
COIL
ー
FIND Search any coil no.: Detects any coil.