User`s manual

6-17
Description of multi overlap No. 0 (call overlap) screen
For displaying ladder circuit, switches are arranged on a matrix of 15 (horizontal) x 12 (vertical).
Secure space for 2 grids (left and right of a switch) and arrange a switch occupying 3 (horizontal) x 2
(vertical) so that the switch is arranged with the same pitch as one of the ladder chart contact points.
Note: The screen above is shown with colored switch frames for explanation purpose. In the actual
screen, the switch frames are white and cannot be seen.
On the actual screen, translucent switches will be arranged on the contact points.
Switch function of the contact point touch search instruction
Contact point where the cursor does not highlight: The cursor moves to the touched contact point.
Check command display.
Contact point where the cursor highlights:
The LCD control terminal searches a coil of the
touched contact points and displays the ladder
circuit.