User`s manual

6-21
(4) Numeric key memory search instruction
- SET
-
LDR: COIL
-
FIND
Setting display of macro block No. 6 (Numeric key input search: Executes call by CALL 6)
On the basic screen "LADDER82.Z71," this instruction is used for macro block No. 6.
This is used for ON macro edit of the multi overlap No. 1 "Search" switch.
Select the "Detail" → "ON Macro Edit" → "CALL 6," in that order to assign this function.
Description: In the lines 2 to 4 of the above edit dialog box, it is programmed to turn ON the multi
overlap No. 0 (for displaying ladder circuit) when the "Search" switch (described in the
next page) is pressed. Lines 7 to 9 are programmed to determine the entered memory
number ($u1000) and memory type ($u1001: One from Coil/TMR/CNT) and enters into
the circuit search process.