Operation Manual

9
– Furniture surrounding the oven must
be made of heat resistant materials -
more than 50 C° of the room tempe-
rature.
Required changes to wall cabinets and
exhaust fans above the built-in combi-
ned product as well as minimum he-
ights from the oven board are shown in
Figure 1. Accordingly, the exhaust fan
should be at a minimum height of 65 cm
from the hob board. If there is no ex-
haust fan the height should not be less
than 70 cm.
HOB
Minimum
42 cm
Minimum
42 cm
Minimum 65 cm
(with hood)
Minimum 70 cm
(without hood)
INSTALLATION OF BUILT-IN
OVEN
550 mm
595 mm
576 mm
min.590mm
min.600mm
595 mm
575 mm
min.555mm
max. 560mm
max. 580mm
550 mm
557 mm
595 mm
575 mm
min.590mm
min.
5mm
min.600mm
595 mm
576 mm
min.555mm
min.560mm
max.580mm
2 x
Insert the oven into the cabinet by pus-
hing it forward. Open the oven door and
insert 2 screws in the holes located on
the oven frame. When the product fra-
me touches the wooden surface of ca-
binet, tighten the screws.
Worktop
min.
25 mm
min.
50 mm
Built-in hob
Built-in oven
If the oven is installed under a hob, the
distance between the worktop and the
top panel of the oven must be a mini-
mum of 50 mm and the distance bet-
ween the worktop and the top of control
panel must be a minimum of 25 mm.
WIRING AND SAFETY OF
BUILT_IN OVEN
The instructions given below must be