Service manual

KB-3411JS

KB-3411JK

KB-3411JW

OVEN COMPONENT REMOVAL

1. After dissaembly as previously stated, remove Microwave Drawer assembly by removing (2) screws (right & left) from

front of Microwave Baseplate (Fig. R-1).

2. Unhook wires from Range Oven to Microwave Drawer, remove Drawer assembly from Oven.

You now have access to Range Oven components.

MICROWAVE DRAWER ASSEMBLY REMOVAL TO ACCESS OVEN COMPONENTS

Fig. R-1

screw

Air Duct

Back Plate

At this point, you will have access to all parts of the Microwave and Oven.

14. Remove screws from Microwave top Air Duct and take off (Fig. 7).

15. Remove all screws from Microwave Back Plate (Fig. 7).

16. Lift Back Plate and remove carefully not to damage any wires (Fig. 7).

The Microwave Back Plate cannot be

completely removed due to wiring. If you

need to remove, you will have to unhook all

wiring routed through it.

Also, the cushion placement is very important

and must be replaced if damaged during

removal (Fig. 8).

NOTE:

Fig. 7

Fig. 8