Manual

MICROWAVE DRAWER COOKING
MULTIPLE SEQUENCE COOKING
The Microwave Drawer can be programmed for up to four automatic cooking sequences, switching from one power level setting
to another automatically. Sometimes cooking directions tell you to start on one power level and then change to a different power
level. Your oven can do this automatically.
• Suppose you want to cook roast beef for 5 minutes at 70% power and then continue to cook for 30 minutes at 50% power.
1 Enter cooking time by touching
number pads [_[_[_.
_TouohSTARTor select
from the optionsbelow
Multiple K'_.
PowerLeve_ START
2 Touch Power Level 3 times to choose
70%. You can omit this step when you set
100% power. Touch Multiple Sequence.
_TouohSTARTor select
from the optionsbelow
_Use the numberkeys to
set cookingtime
3Notethatl00%stage 2 appearsinthe
banner.
4 Enter second cooking time [_][_][_][_].
Multiple
5 Touch Power Level until 50% Stage 2
appears in the display. Touch START.
STAGE I
Power 70% MinutePlus
Time 3459
6 The display will begin counting down
the total cooking time.
During cooking, the power level will
appear in the display. At the end of
Stage 1,the microwave will automatically
change to Stage 2.
TO SET POWER LEVEL
There are eleven preset power levels.
Using lower power levels increases the cooking time, which is recommended for foods such as cheese, milk and long slow
cooking of meats. Consult a microwave cookbook or recipes for specific recommendations.
TOUCH POWER APPROXIMATE COMMON TOUCH POWER APPROXIMATE COMMON
LEVEL PAD NUMBER PERCENTAGE WORDS FOR LEVEL PAD NUMBER PERCENTAGE WORDS FOR
OF TIMES FOR OF POWER POWER LEVELS OF TIMES FOR OF POWER POWER LEVELS
DESIRED POWER DESIRED POWER
If Power Level is not touched 100% High Power Level x 6 40%
Power Level x 1 90% Power Level x 7 30% Med Low/Defrost
Power Level x 2 80% Power Level x 8 20%
Power Level x 3 70% Medium High Power Level x 9 10% Low
Power Level x 4 60% Power Level x 10 0%
Power Level x 5 50% Medium Power Level x 11 100% High
19